Our office will be closed on Thursday, September 14th and Friday, September 15th to update our servers. We will resume normal business hours Monday, September 18th.

GT930 CHIN BAR REMOVAL PROCESS

In seconds, and without tools, you can convert your full-face helmet to an open-face to meet changes in riding conditions, or your personal preference. Whether you choose to ride in full-face or open-face mode, both configurations also benefit from an integrated SpeedView® drop-down sun visor, which can be easily accessed by gloved hands. The dual homologated (DOT & ECE 22.06 P/J) Advanced Polycarbonate shell and Multi-Density EPS provide the energy displacement and protection you need. And for those who need to stay connected, the EXO-GT930 was specifically designed to integrate with the new EXO-COM® BlueTooth® Communicator Kit while the large speaker pockets also make it compatible with many other com systems in the market.

 

Play Video

The EXO-GT930 gives you the freedom to Transform your riding experience.

 

PUSH LEVER TO UNLOCK CHIN BAR
PULL UP CHIN BAR
ENGAGE LOCK TO SECURE CHIN BAR

LOCKING FLIP UP CHINBAR: Fully open the chin bar, push lever (P/J) towards shield to lock. Reverse lever position to unlock chin bar

TO REMOVE: With the chin bar fully opened, simultaneously pull the release lever down 1). then grasp and pull the chin bar away from the main shell 2). then repeat these steps on the opposite side to complete the removal.

NOTE:
SunVisor remains fully functional in 3/4 Mode

Reverse these steps to reinstall

 

PULL RELEASE LEVER DOWN
PULL CHIN BAR AWAY
ALIGN AND CLICK VISOR INTO PLACE
PULL LEVER DOWN
SLIDE PEAK VISOR FORWARD

OPTIONAL PEAK VISOR INSTALLATION: While facing the helmet and with the chin bar removed align the peak visor and shell guides. Once aligned, simply slide the peak visor until it “clicks” into place.

TO REMOVE: The peak visor, simultaneously pull the release lever down (red arrow) then grasp and pull the peak visor forward and away from the main shell

ShellSCORPION EXO PART#
SHELL #1SCORPION EXO PART#XSSMALLMEDIUM
R1-650-02Standard+ 5mm (Thicker)+ 10mm (Thicker)
R1-650-03- 5mm (Thinner)Standard+ 5mm (Thicker)
R1-650-04- 10mm (Thinner)- 5mm (Thinner)Standard
R1-650-14- 15mm (Thinner)- 10mm (Thinner)- 5mm (Thinner)
SHELL #2SCORPION EXO PART#LARGE
R1-650-05Standard
R1-650-15- 5mm (Thinner)
SHELL #3SCORPION EXO PART#X-LARGE2X-LARGE3X-LARGE
R1-650-06Standard+ 5mm (Thicker)+ 10mm (Thicker)
R1-650-07- 5mm (Thinner)Standard+ 5mm (Thicker)
R1-650-08- 10mm (Thinner)- 5mm (Thinner)Standard

Optional cheek pads are available for all EXO-R1 Air helmets (CARBON and TCT-ULTRA)